ProgressionZUpperΒΆ

Type:float
Range:[0, inf]
Default:2.0
Appearance:simple

The layer discretization in z-direction, [z_0, z_1, \dots, z_N], is controlled by the maximum side length parameter MaximumSidelengthZ for the entire layer, that is,

\begin{eqnarray*}
z_{i+1}-z_{i} & \leq & \mathrm{MaximumSidelengthZ},
\end{eqnarray*}

and the maximum side length at the upper interface (MaximumSidelengthZUpper), i.e.

\begin{eqnarray*}
z_{N}-z_{N-1} & \leq & \mathrm{MaximumSidelengthZUpper}.
\end{eqnarray*}

With this parameter it is controlled how aggressively the mesh is coarsened with larger distance to the upper interface. It is guaranteed that,

\begin{eqnarray*}
\frac{z_{i}-z_{i-1}}{z_{i+1}-z_{i}} & \leq & \mathrm{ProgressionZUpper}
\end{eqnarray*}